And a train was actually hit! Fortunately it was stationary on the tracks, but it crushed the side panel of the driver’s carriage. Neither the driver nor any passengers were injured in the incident. The drill rig was drilling to install ground source heating or geothermal heating for a hotel when at a depth of 20 to 25 meters (65 to 82-ft), the drillers noticed that they lost resistance when they punched through the subway tunnel. Upon withdrawing the drill stem, they were missing the bottom 2.5-m according to a local police official. Story at The Local. (Photo of N.Y. Subway from runnx)
Related Articles
Caldecott Tunnel fourth bore nears end of big dig
Man Killed In Drilling Accident
On October 26, 2007, a man was killed on Highway 118 in Simi Valley, California when he was apparently entangled in the auger of an excavator mounted drill rig. The rig was drilling holes for a soundwall foundation. Read the full article.
Devil’s Slide Tunnel Construction Kicks Off
On September 17, CALTRANS and Kiewit Pacific held a "tunnel excavation celebration" to kick off the start of tunnel construction on The Devil’s Slide Tunnels project on California State Route 1 (the Pacific Coast Highway) in San Mateo County between the town of Montara to the south and the city of Pacifica to the north. The project involves the creation of a separated two-lane road, one lane in each direction. This road will pass through twin tunnels, over twin bridges and connect with an existing non-separated two-lane road at each end. The new road will be approximately 6,500 feet long, made up of the roughly 4,000-foot twin tunnels, the 1,500-foot north approach road (which includes the 1000-foot parallel bridges), and the 1,000-foot south approach road. Upon completion, the new road will bypass geologically unstable portions of existing Route 1, sections of roadway subject to lengthy closures, high maintenance costs over the years, and risk of permanent failure. Thanks Geology.com for the heads up. [Read on for more background, photos, maps, and movies!] (Images by CALTRANS)
2 Comments
Comments are closed.
It can only happen if the co. is highly unprofessional.
thnks
nk agarwal
Tunnelling Engineering 🙂