Deep Excavation, LLC has an excellent blog post on how geotechnical engineers should provide geotechnical parameters for use by a shoring designer. Mr. Konstantakos notes that most of us geotechnical engineers provide only lateral earth pressure parameters, but there are a number of problems with that approach. Today’s shoring designs are much more complex, requiring staged analyses and service limit analyses that you simply can’t do if all you have are basic parameters. So what should you provide in your geotechnical reports? Go read the post to find out! [Source: Deep Excavation. Image: DeepExcavation.com]
Related Articles
Shoring retaining wall failure in Virginia prompts apartment building evacuation
August 9, 2011
rockman
Failures
Comments Off on Shoring retaining wall failure in Virginia prompts apartment building evacuation
On Sunday evening, a soldier pile lagging wall shoring system failed at the Sedona & Slate residential development construction site in Rosslyn, Virginia (Arlington County). There were no reported injuries, but an adjacent apartment building was evacuated as a precaution and a nearby street is closed to traffic. Click through for a video that shows some additional views of the damage. The scale of the wall is apparent when you see the shots with workers putting braces near the bottom of the wall. I’m guessing the rakers shown in this image were added monday to attempt to stabilize the wall, but that’s just speculation at this point. Image: MyFoxDC.com
19m deep excavation in Tirana Albania – Deep Excavation
May 7, 2019
rockman
News, Project Related
Comments Off on 19m deep excavation in Tirana Albania – Deep Excavation
Developer To Pay Building Owner $3.2 Million For Damage Related to Shoring
April 10, 2014
rockman
Failures
Comments Off on Developer To Pay Building Owner $3.2 Million For Damage Related to Shoring