Another case study from RetainingWallExpert.com, this one for the failure of a 38-ft high geogrid-reinforced modular block MSE retaining wall. They note that the failure of the retaining wall follows their typical recipe, ‘Just Add Water’. The wall was reconstructed with most of the same blocks, but with better backfill and better attention to drainage and geogrid configuration. [Source: RetainingWallExpert.com. Image: RetainingWallExpert.com]
Related Articles
ReSSA Major Update and MSEW Update
The downloads page at ADAMA Engineering lists an update (Number 1) for ReSSA 3.0. I have not even heard anything about the release of version 3.0, and even other pages on their website only mention ReSSA 2.0 as the latest version. As soon as I hear anything about the new version and its additional features, I’ll be sure to post the info here. ReSSA is software for the design of reinforced soil slopes or RSS.
An update for the MSE wall design software MSEW was also released recently. This update is number 8.1 and primarily updates the way reinforcement database files are referenced, allowing the location of the database file currently in use to be stored in the project file. After recently completing a major MSE wall review using MSEW, all I can say is halleluia! I had to manually locate the database file for every single one of my old runs. This should be a nice fix.
ASTM Updates for March, 2012
This post contains a list of new, revised and otherwise updated ASTM standards that pertain to the geotechnical engineering, materials testing and related fields. Standard C39/C39M for testing the compressive strength of concrete cyllinders was updated, as was C42/42m for obtaining and testing drilled cores and sawed beams of concrete. The month of March also saw several geosynthetic standards being updated or added, including new standards for selecting the test method for geomembrane seams, and for testing the flexural rigidity of geogrids and other geosynthetics. There are also a few updated standards related to asphalt mix design and sampling of asphalt. Click through for updated ASTM Standards relating to geoprofessionals.
Judge Rules City of San Diego Not Responsible for Mt. Soledad Landslide in 2007
The Mt. Soledad Landslide in a La Jolla California neighborhood destroyed 3 houses and damaged others and it also shut down Mt. Soledad Road for an entire year after it occurred in October of 2007. Residents blamed the city of San Diego, and 65 homeowners filed suit, claiming that leaking pipes caused the landslide and the City should cover damages.
Last week, a superior court judge ruled in favor of the City of San Diego. So far I have not seen anything indicating if the residents plan to appeal the ruling.
One interesting note regarding the trial, the City released an 8-minute cell phone video taken by a geotechnical engineer or drilling contractor employed by the City that showed the road cracking and buckling just prior to failure. The homeowners used the video to try to make their own case. Click through for a portion of the video and a link to the full one.