Over 200 buildings will receive some form of geotechnical and geostructural monitoring around the Highway 99 tunnel in Seattle, better known as the tunnel that will replace the Alaskan Way Viaduct. A Seattle Times article listed some of the technologies being employed, such as automated survey machines, crack meters, extensometers, tiltmeters, liquid level sensors, inclinometers and crack gauges. A total of roughly 700 devices will be deployed by the time the tunneling starts this summer, a $20 million program. The project team will also be using interferrometric synthetic aperture radar or INSAR techniques to supplement the traditional surveying methods as they watch for subsidence and ground loss problems along the tunnel route. This satellite-based method is accurate up to 1/8 inch, but has the advantage of being able to cover a larger area than just using the survey prisms at particular points. [Source: The Seattle Times via ASCE SmartBrief. Image: KEN LAMBERT / THE SEATTLE TIMES]
Related Articles
Alleghenny Tunnel Nearing Completion but Hurting for Money
February 26, 2009
rockman
Project Related
Comments Off on Alleghenny Tunnel Nearing Completion but Hurting for Money
Seattle tunnel will go under 158 buildings
The tunnel replacing the Alaskan Way Viaduct (SR-99) will pass beneath 158 existing structures requiring an extensive program of vibration and settlement monitoring as well as some remediation. Of the 158 buildings, WSDOT identified 20 […]
Launch Pit Retaining Walls Completed for SR 99 Tunnel in Seattle
August 6, 2012
rockman
Project Related
Comments Off on Launch Pit Retaining Walls Completed for SR 99 Tunnel in Seattle