Dr. Jesus E. Gomez has joined GEI Consultants as a vice president and will lead their geotechnical and geostructural practice in the Philadelphia region. Dr. Gomez has over 30 years of experience, and was previously a principal with Schnabel Engineering. He is well known in the geotechnical community for his work on various FHWA/ADSC publications on soil nails and micropiles, among others. [Source: Read the full press release from GEI Consultants. Image: GEI Consultants]
Related Articles
Changes in Geotechnical Engineering Practice in Arizona
[Editor] Note: NCS Consultants, LLC is Randy Post’s full time employer…ie. my day job! [/Editor]
There are some significant changes being made to the state of the practice in geotechnical engineering in Arizona. NCS Consultants, LLC has prepared three policy memoranda for the Arizona Department of Transportation or ADOT that have been issued to consultants all over the State. These memos are on the topics of bearing capacity and settlement of spread footings and retaining walls, the design of drilled shaft foundations in gravelly soils, and the preparation of drilled shaft axial capacity charts for use by bridge engineers.
Although primarily applicable to upcoming ADOT projects implementing the AASHTO 2007 LRFD code, the memos will have a ripple effect down through other local agencies within the state who frequently defer to ADOT guidelines for geotechnical engineering. Also, the memos and the ADOT/NCS approach to LRFD implementation in geotechnical engineering were presented by NCS at the 2008 TRB Conference in Washington D.C., and many other state DOTs and the FHWA were very excited about the memos. The approach used if not the exact content may become a model for other agencies. More info and links to download the policy memoranda are provided after the break.
FHWA NHI Manual: Drilled Shafts Construction Procedures and LRFD Design Methods
The FHWA has released for download a comprehensive update to the 1999 O’Neil and Reese manual “Drilled Shafts: Construction Procedures and Design Methods”, lovingly referred to in the industry as the “Brown Book” or the “Drilled Shaft Bible”. This 2010 manual from the National Highway Institute (NHI) of the FHWA is entitled “Drilled Shafts: Construction Procedures Procedures and LRFD Design Methods” and was authored by Dan A. Brown, Ph.D, P.E. of Dan Brown and Associates, John P. Turner, Ph.D, P.E. of the University of Wyoming, and Raymond J. Castelli, P.E. From an FHWA Memo on the manual:
Distributed with this memorandum is the publication entitled "Drilled Shafts: Construction Procedures and LRFD Design Methods" (FHWA-NHI-10-016). This manual is the reference text used for the National Highway Institute (NHI) course numbered 132014 on Drilled Shafts. The publication will become the tenth in the series of geotechnical engineering guidelines called "Geotechnical Engineering Circulars." Geotechnical Engineering Circular (GEC) No. 10 is prepared as a significant revision and update to "Drilled Shafts: Construction Procedures and Design Methods" (FHWA IF-99-025), and reflects the standard of practice for the design, construction and inspection of these features. The guidance is developed following Load and Resistance Factor Design (LRFD) procedures and will enable engineers to identify and evaluate technical feasibility and potential applications. The text is developed with a sufficiently broad scope to be of value to a wide range of transportation specialists responsible for assisting with selection, design, development of materials specifications, construction monitoring, and contracting methods for Drilled Shafts.
Click through for the download link and some preliminary comments on what has been updated in this significant new publication in the drilled shaft construction industry as well as the geotechnical engineering profession.