If Norway’s Stad Ship Tunnel gets approved, it would be located on the Stadhavet Sea, an area known for heavy winds and hurricanes. Stormy weather makes it almost impossible for ships to travel in the area. Vessels often wait for hours or even days before it becomes safe enough to cross. A study has been performed by the Norwegian Coastal Administration (NCA), and their findings are scheduled to be released this May. If approved by the Norway Department of Transport, construction could begin as early as 2019. [Source: View more info at Business Insider via AGC SmartBrief. Image: Norwegian Coastal Administration via Business Insider]
Related Articles
Devil’s Slide Tunnel Construction Kicks Off
On September 17, CALTRANS and Kiewit Pacific held a "tunnel excavation celebration" to kick off the start of tunnel construction on The Devil’s Slide Tunnels project on California State Route 1 (the Pacific Coast Highway) in San Mateo County between the town of Montara to the south and the city of Pacifica to the north. The project involves the creation of a separated two-lane road, one lane in each direction. This road will pass through twin tunnels, over twin bridges and connect with an existing non-separated two-lane road at each end. The new road will be approximately 6,500 feet long, made up of the roughly 4,000-foot twin tunnels, the 1,500-foot north approach road (which includes the 1000-foot parallel bridges), and the 1,000-foot south approach road. Upon completion, the new road will bypass geologically unstable portions of existing Route 1, sections of roadway subject to lengthy closures, high maintenance costs over the years, and risk of permanent failure. Thanks Geology.com for the heads up. [Read on for more background, photos, maps, and movies!] (Images by CALTRANS)
Geotechnical work begins on Sydney’s $2.5B North West Rail Link
Feb. 7 Bertha update: Two factors contributed to tunnel stoppage
WSDOT released an update on February 7 with some conclusions regarding the blockage that has stopped the Alaska Way Viaduct Tunnel Boring Machine, Bertha’s progress since December 6. Now they don’t think it was necessarily the well casing after all.
They cite two factors that contributed to the blockage. First, the cutterhead was clogged with material. You can see an cool short video of a worker unclogging the cutterhead. Not terribly dramatic, but still cool. The second factor was increased temperatures inside the equipment. STP discovered damage to a seal that protects the machine’s main bearing. They are still determining how the repairs will be done.
If you want to follow the chronology of this issue, read below for summaries and links to previous updates from WSDOT. And Check out the videos too! [Source: WSDOT]