A shoring retaining wall at a Rome construction site failed at around 5:30 pm local time on February 14, 2018, and swallowed 6 parked cars from the adjacent street and required evacuation of some 20 families. The incident occurred in the Italian capital’s Baldunia neighborhood, between via Livio Andronico and via Lattanzio. There are no details yet on what caused the collapse. But an ABC news article mentions that the failure occurred in the same area where a sinkhole formed in late January “after reports of a significant water leak” making water a likely culprit. Monitoring of the remaining excavation has been undertaken and the local prosecutor is opening up an investigation into the incident.
The only portions of the World Trade Center towers that survived the attack on 9/11 were the basement slurry walls, part of the original shoring and foundation system. The National September 11 Memorial and Museum at the World Trade Center that is currently under construction will preserve a portion of that wall making it the largest exhibit the museum will offer. The wall section displayed will be 62-ft by 64-ft.
The existing slurry walls are being incorporated into the foundation system of the new facility but not without some improvements. The are adding some kind of foundations improvements to stabilize the toe of the walls, the New York Times article calls them caissons, but I don’t know if its a tangent or secant wall or something else. They are also lining them with additional concrete and reinforcement in front of the walls along with additional tiebacks to stabilize them. In the portion of the wall that will be displayed, a counterfort wall will be constructed behind it and new tiebacks will be installed on the front. Work for the counterfort wall will be done by hand in order to avoid the existing tieback cables. All of the existing tiebacks will be left intact. Check out the NY Times article for a great graphic showing the system. (Illustration by New York Times)
On Sunday evening, a soldier pile lagging wall shoring system failed at the Sedona & Slate residential development construction site in Rosslyn, Virginia (Arlington County). There were no reported injuries, but an adjacent apartment building was evacuated as a precaution and a nearby street is closed to traffic. Click through for a video that shows some additional views of the damage. The scale of the wall is apparent when you see the shots with workers putting braces near the bottom of the wall. I’m guessing the rakers shown in this image were added monday to attempt to stabilize the wall, but that’s just speculation at this point. Image: MyFoxDC.com