In Bell Chase, Louisiana, a huge vibratory driver/extractor manufactured by American Piledriving Equipment Inc. was used to extract 54-in diameter pipe piles 140-ft deep. The piles were part of a cofferdam for the largest pumping station in New Orleans. The contractor was a joint venture between Kiewit Corp. and Traylor Brothers Construction Inc. [Source: National Driller Foundation Report Newsletter. Image: National Driller Foundations Report]
Related Articles
Developing Production Pile Driving Criteria from Test Pile Data
August 29, 2011
rockman
Available Resources
Comments Off on Developing Production Pile Driving Criteria from Test Pile Data
From the report summary: Although exploratory borings and engineering studies during design are an integral part of foundation engineering, the axial resistance of a driven pile foundation is ultimately determined by the criteria used to […]
APE Pile Driving and Helical Pile Introduction Video
March 10, 2014
rockman
Available Resources
Comments Off on APE Pile Driving and Helical Pile Introduction Video
APE develops Helical Pile systems
Well-known pile hammer manufacturer APE has purchased technology for driving and coupling large diameter helical piles that could help make this technology more mainstream. Rather than pounding the pile into the ground, the steel drill […]